Abrasive blast recovery systems are manually operated system. It is capable of abrasive blasting, recovery and classifying a wide variety of abrasive media. It consists of three basic components such as blasting system, media classification system and vacuum recovery system. The blast system consists of a storage hopper a single chamber pressure vessel blast pot with two blast outlets. With a maximum operating pressure 150 psi. And each blast outlet features a molded dead man switch. During blasting operation the blast pot is pressurized. The blast chamber is depressurized utilizing the blow down valve on the side of the blast pot, and refilled from the storage hopper. The media classification system is integral with the blast system hopper and the vacuum recovery system. Dirty grit is vacuumed into the top of the storage hopper where it falls onto a vibrating screen.