Profile: Aerosion Ltd. offers disintegrators and sand cleaners. Our disintegrator is a device used for reducing friable materials to small particles. Reduction is accomplished by launching pieces of material to be disintegrated at a closing target with sufficient velocity to cause the material to break into fine powder. The design of the apparatus allows for very high closing velocities between the material to ground and the teeth on the grinding wheel, thereby producing very fine powder. The disintegrator is designed to focus the impact of material on the grinding teeth and rails of the throwing wheel. These surfaces are made of wear resistant materials such as ceramics to increase the life of the wear parts and to reduce the contamination of the finished product. The disintegrator is designed for rapid servicing and quick replacement of grinding surfaces. These are used in producing finely ground zeolites and cement for use in oil production. The size of the fine particles combined with the low operating and capital costs make the disintegrator uniquely suitable for the application.