Description: Hameg HM 507 Analogue-Digital Storage Oscilloscope with analogue mode is used to view fast repetitive signals by merely pressing one button switch to storage mode in order to view non-repetitive, single shot events. HM 507 has a built in RS 232 interface to transfer the waveform to PC, which is supplied with free powerful waveform processing software that includes 12 math functions and FFT analysis including 20 windowing functions. The CRT ensures a noise free bright display of the signal. The trigger circuit is designed to provide reliable triggering to over 100 MHz at signal levels as low as 0.5 div. Other standard features include a built in frequency counter, auto measurement, on screen math function and 3 reference memory. The component tester has been retained despite its compact size and lightweight. It has a built in calibrator - a 1 kHz/1MHz square wave generator. It allows frequent checking of the instrument's frequency response-from the probe tip to the display on the screen. It also permits high frequency alignment of the probes. Another important feature is the pre/post trigger function that enables the user to analyze signal components that occur before/after the trigger event. Two full-size reference memories allow the comparison of signals with those already stored in memory. When the Autoset function is enabled, all relevant parameter settings are performed by the scope's circuitry automatically. The setup parameters and the measured values are clearly displayed on the screen in alphanumeric characters. Autoset also initiates automatic cursor settings for time and frequency measurement (digital only) as well as voltage measurement. The instrument may be remotely controlled by any personal computer via its built in serial interface in all relevant functions. A suitable software program is supplied with the scope on delivery.
Other Catalogs (From Scientific Mes-Technik Pvt Ltd) :
