Bulk Hopper Feeder
The bulk hopper feeder is developed by Prod-Aid Engineers. This feeder is useful for feeding bulky and heavy component to forging press and furnaces. The limitations of the bowl feeder is normally the holding capacity which is 10-15 kg only, which results in frequent recharging of the bowl for every 10 to 15 minutes. The bulk hopper feeder will augment the holding capacity of bowl feeder to the extent of 100 kg or 100 litres, thereby enabling the feeding system to work without recharging for over an hour. The system is fitted with an electromagnetic vibrator and can be made to work on auto cycle based on the level sensor mounted on the bowl feeder. It requires 230 V single phase input supply and the power requirement is as low as 160VA. Variation in hopper capacity, feed rate, material of constructions in MS, SS, or lined with vinyl mat is offered based on the applications.
Other Catalogs (From Prod-Aid Engineers) :
| • | Hopper Feeder |
