Description: Camprofile gaskets are most suitable for safe sealing of media under extreme operating conditions of temperature up to 550°C/1,022°F and pressure up to 400 bar/5,800 psi. They combine the characteristic properties of compressed non-asbestos fibre materials for good adjustment to the flange face surface and metallic seals for high stability and bursting strength. Under service conditions it is always guaranteed that the peaks of the camprofiles are covered with layers of a minimum .2 mm/.O1 inch. Flanges with surface finish Rz=160 Nm of flange type B and C act. to DIN (similar to AARH up to 250 mils) can be sealed safely. The flange faces will also show no material wear. A small diffusion cross-section and a high tightness of the layer material cause very low leakage rates in order to fulfil the strong demands of regulations (e.g., TA-Luft = legal emission limits and UVV = regulations for accident prevention at work). The selection of the appropriate gasket materials and the possibilities to vary the gasket shape makes this type of gasket suitable to many media and operation conditions.
