Profile: Dehumidifier Corporation of America, Inc. manufactures dehumidifiers for indoor swimming pools, commercial/industrial dehumidification, make-up air, water treatment facilities and custom applications. Our dehumidification systems are used to control moisture & humidity in hotels, fitness centers, warehouses, libraries & computer rooms. Our computer designed system takes moisture laden air from the conditioned space and passes it over the deep row dehumidification coil. The temperature of this air is lowered to its dew point temperature and water is released to the coil from the air. This air is immediately passed through a re-heat coil raising the temperature equal to a combination of sensible and latent heat from the refrigeration cycle. The air leaving the dehumidifier is 10 to 15 degrees warmer than the air entering. This warmer air adds room heating and is beneficial during the cold months. All our industrial dehumidifiers are factory test run to assure efficiency and capacity. The operation of the industrial dehumidifier is completely automatic. A humidistat starts the dehumidifier upon a build-up of humidity in the room and stops when the set point is reached. The room heating or cooling is controlled by an automatic change over thermostat that controls the optional remote condenser. We offer a variety of accessories for our industrial dehumidifiers, including remote control condensers and water cooled dehumidifiers. The indoor separated combustion duct furnace is designed for use with a building's heating, heating/cooling and make-up air systems. Separated combustion duct furnaces are specifically designed for buildings with hostile atmospheric conditions, such as high humidity, or negative pressures. Available in 11 power exhausted model sizes, the unit covers a wide variety of applications. They have input ranges from 75,000 to 400,000 Btu/hr and can operate on either natural or propane gas. The airflow direction can be specified when ordering the unit.