Description: Digital force gauges are suitable for various tension and compression force measuring applications. Manufactured by Mark 10, USA, features include RS232, Mitutoyo and analogue outputs, GCL - gauge control language for full control of all functions, automatic timed output on RS232, dual set points with outputs, general purpose UO for external device control, programmable analogue and digital filters, averaging modes forobtaining average force readings over time, reversible aluminium housing for hand-held use or stand mounting, three units of measurements: lb, kg(s), N, programmable initial status of units and mode of operation, automatic peak memory, push-button calibration, battery or AC operation, programmable auto-shutoff, permanent configuration memory; measures tensile and compressive forces. Specifications: accuracy - ±20% of full scale, ±1 digit; sampling rate - 65 readings per second; display rate 2.5 - 10/sec, 65/sec in peak mode; display - 4%z digit LCD 0.3 (7.6 mm) high indicator for low battery, units and mode of operation, power AC or rechargeable battery with IPM, a 3-step intelligent power management system that warns user via LO BAT indicator and then will shut off the gauge, battery life 810 hours of the continuous use, sensor deflection 0.010 (.25mm) maximum defection at full range display shows at 110% and above, weight (gauge only): 0.951b (0.4Kg). Included accessories: chisel, cone, V-groove, hook, flat and extension rod. These digital force gauges are offered by NavTek Instruments.
Other Catalogs (From Navtek Instruments (India) Pvt Ltd) :
