Profile: Flow Control Engineering, Mumbai is a supplier of different kinds of hydraulic and pipe fittings. Our industrial products include brass, CS, SS 304, & SS 316 hydraulic and pipe fittings. Flow control pipe joint gives the sealing and pressure holding characteristics. This fitting consist of a three piece design namely body, nut and a special case hardened ferrule. During the assembly of the fitting a pipe, the nut is screwed on the body causing the ferrule to slide along the inner conical seat of the body and grips the pipe further tightening the leading edge of the ferrule bites in to the pipe throwing up a visible collar of displaced metal which acts as a metallic interlock and results into a leak proof joint. In addition to a sealing member the case hardened ferrule functions as a spring washer maintaining continuous tension between pipe surface, fitting body and nut which helps the joint to remain pressure tight even during heavy vibration. For maintenance these fittings can be dismantled and re-assembled when ever required without affecting the seal and weakening the pipe. We also offer steel fittings, couplings, connectors, nuts & ferrules, PVC pipe clamps, hydraulic sleeves and pipe plugs.