Profile: Formost Industrial Products is a manufacturer & distributor of plastic fans, terminal blocks, centrifugal switches, nylon terminal boxes, M. S. fan cover & terminal boxes for 3 phase and single phase motors. We have over 120 different types of plastic fans starting from 56 Frame (1/8 HP) to 225 Frame (50 HP). The raw material used for these fans are polypropylene or glass filled polypropylene or glass filled nylon. Most of these fans are meant for totally enclosed motors. We also have a few varieties for rotors. The shaft diameter of these fans can be varied within certain limits. Terminal blocks are made out of phenolic formaldehyde molding powder (bakelite) and dough molding compound (DMC) with brass or M. S. inserts molded. These terminal blocks are designed to withstand over 2 kv. load as per the standard specification. We can also supply terminal blocks molded out of UL certified DMC. We have over 100 different types of terminal blocks suitable for various types of motors. We have different types of centrifugal switches for 4 pole and 2 pole single phase motors of 50 cycles & 220 volts. We also offer a limited variety for 6 pole motors. These switches operate at approximately 75% of the rated rpm of motors to cut off the supply to the starting capacitor and auxiliary winding. All our centrifugal switches are checked for electrical leakages and consistency of opening speeds. We also offer heavy duty contacts for motors above 1 HP to 3 HP rating.