Horizontal Machining Centre, Ec 630

Description: Horizontal machining centre, the EC-630 represents the latest expansion of Haas Technical's rugged line of high-productivity HMCs. The Haas EC series machines are proven workhorses, built with a host of productivity, features in their standard configuration. Purchasing expensive options is not required, since the power and performance to cut everything from high-nickel alloy steel to fine-finished aluminium is built into the machines. Alogical extension of the EC Series, the EC-630 is the largest-capacity, high-production machine Haas has yet produced. It features a 40″ x 32″ x 35″ is work envelope, 50-taper geared-head spindle, dual pallet changer with 630 mm pallets, 50-pocket side-mount tool changer and a built-in 5-degree pallet indexer. A high-precision 1-degree indexer or full 4th axis is also available. Each 630 mm pallet handles a 2640 lb load, and the servo-driven pallet-changer swaps pallets quickly. A separate, protected load station allows the operator to safely load and unload parts or change fixtures on one pallet, while parts are being machined on the other - keeping spindle run-time at a maximum. The machine's enclosure accommodates parts up to 39.4″ in both diameter and height. For long-cycle production with minimal downtime, the EC-630 is equipped with a large-volume coolant tank and a high-capacity belt conveyor for efficient chip removal. A1 so standard are 500-ipm rapids, a floppy disk drive, 1 MB of program memory and a 300-psi through-spindle cool ant system.