Forced air heaters use a fan to blow air that is warmed by metal or ceramic heating elements. A forced-air heater is appropriate for quickly heating up a small- to medium-sized room. It is ideal for use in large construction, commercial, and industrial sites. It is effectively a very hot flame with a large fan running behind it pushing huge amounts of cold air past the flame. These heaters can be operated using different fuels such as natural gas, propane, and kerosene.

Heat Shield is an automotive windshield reflector. It is designed to fit the shape of each car model's windshield, especially for Canvas Works. This laminate is sturdy and reflective, and it has insulating properties. The material is simple and unique. It has metallized polyester film, laminated to a thin layer of closed-cell foam, with a clear polyester film back. It is designed especially for Canvas Works, this laminate is sturdy and reflective, and it has excellent insulating properties.

Heat Shrink Sleeves are manufactured from radiation-crosslinked polyethylene tape, provided with a self-priming thixotropic sealant. The total thickness is 1.5 - 2.5 mm, with a backing tape of 0.6 - 1.0 mm. Heat shrink sleeves provide a safe and efficient method for protecting fusion splices on either 250 or 900 micron coated fibers. Heat shrink sleeves are threaded on to fibers prior to fusion splicing and then positioned directly over splice & heated via an oven or heat gun. Heat shrink sleeves are labels that are applied to a container and shrunk to fit the contours of the container through the addition of heat.

Heating Modules are used for everything from heat-treating and billet heating, to pipe and duct heating and fluidized beds. These are available in flat, cylindrical or semi-cylindrical configurations. These elements are partially or fully embedded in a non-electrically conductive castable ceramic. The temperature range is up to 2000° F (1100° C).

High temperature insulation is used in industrial, scientific and commercial applications that reach in excess of 4000 degrees Fahrenheit. These materials enable OEMs and other end users to monitor and control various processes in such extreme temperatures.The materials used in these applications include alumino-silica and mullite ceramic fibers, calcium silicate, alumina bricks and mineral wool fibers maximum insulating capacity. They are used for high-temperature applications have low thermal conductivity and minimal heat storage. The ceramic fibers also provide excellent resistance to environmental conditions and offer a lightweight solution for the manufacture of various aeronautic components. They are used in microwave drying and the production of fuel cells.

High Temperature Insulation Sleeves protects workers from burn injuries on high temperature flexible hoses, pipes and equipments.

Hose Insulation is used to maintain proper temperature of product. It fits all types of spray hoses. It uses in conjunction with abrasion sleeve to protect hose from job site damage.

Inductors stores energy in the form of a magnetic field. In its simplest form, an inductor consists of a wire loop or coil. The inductance is directly proportional to the number of turns in the coil. Inductance also depends on the radius of the coil and on the type of material around which the coil is wound.

Infrared Radiator has a twin tube with an inner bridge that separates two housings, which run along the longitudinal direction of the tube. The heating spiral arranged in the housings is provided with an external electrical current supply. A bore is formed in the inner bridge of the heating spiral. The heating spiral is electrically connected to the connection wire. The connection body is inserted into the through bore and the inner bridge and is electrically connected to the heating spiral and to the connection wire.

Insulating blankets are made of varying compositions usually interwoven fibers, which contain a high consistency of alumina. The blankets come in varying thickness from one to three inches and are formed into rolls of varying widths. The blankets help to keep the heat in the pipe.