Manifold For High-Pressure Instrumentation
Company: Parker Hannifin, Middle East
The 3/8 inch (10 mm) bore double block and bleed manifold is launched by Parker Instrumentation. This will operate at up to 15,000 PSI (1,034 bar) cold working pressure. The innovative new Hi-Pro lSKSI DBB manifold saves a great deal of space and weight, and greatly enhances integrity by eliminating numerous potential leak paths. In addition, it is supplied with thread-less connections for tubing. The manifold is supplied with 15,000 PSI-rated MPI tubing ends that operate using the industry-standard compression sealing technique. These can be assembled in seconds by simply tightening a nut, and are inherently vibration resistant. MPI tube end sizes from 3/8 to 3/4 inch (9.5 to 19 mm) may be specified. The end connections are secured by means of Parker's proprietary Tru-Loc mechanism, to guard against any connector movement when disconnecting connectors or instrument. Optionally, NPT compatible male or female ends are available. The Hi-Pro manifold integrates two ball valves for isolation, and one needle valve for venting, providing a standard `double block and bleed' configuration for interfacing instruments such as pressure or temperature transmitters. The valves are integrated within a 316 stainless steel one-piece body measuring just 9.31 inch (23.6 cm) in length for the version with MPI tube ends. Among the application sectors that can benefit from this innovation are deepwater oil and gas drilling and methanol injection equipment, and industrial laboratories, where products are developed and tested under extreme conditions.
Other Catalogs (From Parker Hannifin, Middle East) :
| • | Instrumentation Manifolds |
