Description: Mega 9099 Metzer metavision metallography workstation is inverted with fully imported optics, ideal for image analysis. The standard specification of the workstation includes the following : microscope Stan sturdy, well contoured and practical inverted and ergonomically designed; viewing head: binocular observation head conveniently inclined at 45° off the horizontal, with coated prisms and inter-pupillary and dioptric adjustment. Trinocular port for CCD or 35 mm camera; focusing: co-axial focusing module with slides traveling on ball bearing guide ways. Large, graduated mechanical stage with low drive co-axial controls for X-Y movement, on the ball slides; nosepiece: quadruple revolving nosepiece for quick magnification change, with positive click stops for proper centering; objectives: special flat field, glare free, high-contrast parafocal plan objectives M10x, M20x M40x & 100x (oil); eyepieces: compensating high eye point wide field eyepieces HKW l0x (field no: 18); magnification: 100x to 1000x for visual observation, 50x to 1600x digital on monitor; C mount: built-in C mount to interface CCD/digital camera; illumination: a special 6V/50 W halogen illuminator powered by switch-mode power supply (SMPS) to ensure constant output voltage ideally required for microphotography.
Other Catalogs (From Menzel Labortechnik) :
