Description: Micro Roll Marking Machine is suitable for marking cylindrical (solid or hollow) components of steel, aluminum and brass. This marking machine can be used for marking specific components like drills, taps, engine valves, spark plugs, cutting tools, diamond tools, bushes, nozzles, sanitary fittings, hose end fittings, gas lighters and studs. It requires very less set up time. It is cost effective and easily operated. The marking depth is set by adjusting the vertical dove-tail slide, which can then be locked in any position for repetitive work. The steel type or marking dies are mounted in a holder fixed to the machine carriage and a simple hand lever operates the carriage, producing a uniform, legible marking. These machines are available in two different models- Model RH 10 Model RH 15. Both models have the marking capacity of 1 line of 3mm characters 2 lines of 1/16' character. The general dimension of the both the models in terms of height, width and length is 350 mm x 270mm x 320mm and 400 mm x 270mm x 320mm respectively. Both weight approximately 30 kgs.
Other Catalogs (From Micro Engg. Works) :