Profile: Motion Control Engineering, Inc. provides elevator control products. The Motion 4000™ traction elevator control is designed to squarely meet the needs of elevator installations requiring speeds to 450 feet per minute, service up to 32 stops, and elevator groups to 6 cars. It makes the jobs of installers, adjusters, and maintenance personnel as straightforward as possible, stressing minimal hardware requirements, out-of-the-box job readiness, and simple adjustment. The Motion 3000ES™ escalator control is available in VVVF variable speed or wye/delta direct line control versions. VVVF models provide two-speed operation and allow the control to automatically select energy saving operating modes (reduced speed or stop) when traffic conditions warrant. The standard configuration uses two (direct line) or three (VVVF drive) small cabinets, one for the primary electronics and top entrance, one for bottom entrance electronics, one for the VVVF drive if used. This distributed architecture simplifies connections and reduces wiring bulk.