Profile: P D I Communications, Inc. deals with analog and digital equipment. We are an ISO 9001 certified company. Our product line includes PDI SuperSpec® Hi-def A/V cables, PDI F-881  RG6 panel, PDI SuperSpec Coaxial Cable® and 60APD digital HDTV signal processor. Our PDI-60APD is a SAW filtered, TV signal processor designed primarily to feed 8VSB digital broadcast signals through a cable system to television receivers or interface converters able to decode the signal. Rock solid PLL controlled tuning by advanced microprocessor insures precise UHF, VHF or CATV channel access. The design of the input achieves a wide dynamic range and very low noise figure. Input tuning covers the range of 54 to 860 MHz. The agile output ranges from 54 to 860MHz and is controlled by another PLL circuit with 12.5 or 25 kHz offsets. Both the input and output channels have non-volatile memories that restore the channels automatically in the event of a power failure. An external IF loop is available on the rear of the unit enabling the processor to serve as a digital up converter in high speed internet CMTS and other digital systems. Our PDI F-881 is an 8 port cable interface with a grounding boss for safety. It is made from a single piece of diecast zinc and is tin plated. It is generally used to establish a demarcation point allowing MDU facilities to have multiple video service providers. This flexible use device also offers the operator the ability to add pads, trap signals and check levels at a convenient point. It is an ideal location for mounting a MoCA filter.