Profile: Paragon Engineering Works manufactures cylinder liners and sleeves. Our cylinder liners and sleeves are machined in our well equipped plant having special purpose indigenous & imported machines like grinders, heavy lathe, CNC, vertical boring & hydraulic honing machines that ensure the highest standards improving the engine life & fuel efficiency. Online inspection of cylinder liners and sleeves is also carried out with sophisticated electronic gauging equipments ensuring dimensional accuracies, for a high performance oriented product. We are fully equipped with extensive facilities for material development, computer aided stress analysis to predict high stress areas and distortion of cylinder liners under dynamically loaded conditions to enable design & material optimization. Scanning electron microscope is used in the development of cylinder liner bore topography to minimize oil consumption and control wear. Every cylinder liner and sleeve is carefully cleaned with kerosene. After it is dried, it is dipped into a special rust-stop oil which provides resistance against corrosion and also ensures long durability of the liners. The same is warped in a plastic sheet. The liners are then packed into a corrugated sheet, and then into a 5-ply sheet carton, specially prepared according to the size & the set of the liners. Cylinder liners meant for international market are packed in special corrugated cartons which eliminate the chances of breakage in transit. They are chemically treated to protect them from rusting due to hazardous environmental condition during transit.