Recessed Docks For Cold Stores
Recessed Docks for Cold Stores are 50 cm longer than the dock leveler, so that these end 50 cm inside. The construction is very rapid, easy and does not require reinforcements. The overhead door closes on the horizontal under panel, but the system is made easier by the dimension of the sectional door having a bottom narrower part and hence it does not require side pockets. On the left side, is a cold bay built with a Campisa prefabricated dock. The simple construction does not require any reinforcement and the prefabricated dock costs low in comparison to the traditional system. The completion of the loading bay, with the Campisa prefabricated docks is very rapid on the left side of the finished loading in a perfectly smooth manner and without requiring any expensive side pocket for the sectional door. On the right side remains the building from outside, with all bays closed before the installation of the dock shelters. These are fresh loading bays for inside temperatures between 0°C and + 5°C and outside temperature should not be too hot in the summer. Before every loading bay, there are ground wheel guides, for a perfect docking of the approaching vehicles. In the inside, the sectional doors close completely against the horizontal insulating panel under the dock leveler and work in perfect security because the parachutes remain at the height of the inside pavement. There are no side pockets, thus there's no risk of shearing or crushing. The door has a patented system of break of the thermal transmission at the leveler front, wedge operated against a couple of insulated side conic portions. Gandhi Entrance Automation offers recessed docks for cold stores.
Other Catalogs (From Gandhi Automations Pvt Ltd,) :
