Profile: RhinoTech is a manufacturer of pre- and post-press products & equipment for the screen-printing industry. Our adhesive systems require no premixing of solvents and offers tension holding capabilities of over 70 newtons. We offer a wide range of adhesives that bonds all types of frames. These adhesives dry in seconds and are non-hazardous. Our epoxies are available as single and two components & one to one mix ratio systems that exhibit exceptional gap filling characteristics. They can be machined, tapped and drilled. Our epoxies possess tensile shear strength, impact strength and chemical resistance. Our epoxy resin, when mixed with the hardening agent causes a non-reversible chemical reaction which produces a solid, cross-linked, high molecular weight polymer that provides tough, insoluble bonds with good adhesion to a variety of substrates. Because of the unique combination of properties found in our epoxies, they are used in a wide variety of industries from construction and automotive to high tech electronics assembly. Our RhinoBond 19 EPX is a steel filled epoxy. It bonds metals, concrete and masonry & can be machined to close tolerances. It withstands temperatures up to 250°F. Our adhesives are designed for general bonding applications. These adhesives meet MIL requirements and are available in a range of viscosities formulated to meet specific applications. Our pneumatic clamping system is designed to offer speed, flexibility and size expansion features. Being versatile and easy to operate, this system offers the utmost in speed & stretching efficiency. Ultimate accuracy is achieved through the use of an adjustable clamping system, which enables the fabric tension to be stabilized on the entire frame. Separate regulators and gauges allow complete adjustment in both the warp & weft directions, maintaining repeatable uniform tension-screen after screen. Each stretcher is custom built with fine materials, which assures years of service.