Profile: Seasons Clock Systems offers analog and digital clocks. We carry analog clock for two types of clock's systems, three wire synchronous, and current carrier. This allows us to provide a broad product line that meets the requirements of our customers. A three wire synchronous clocks system provides power and correction signals through a dedicated three wire system to a relay at the master clock. In a current carrier clock system a signal generator (transmitter) imposes a correction signal onto the building's AC power grid. The SCS A1200 analog clock combines the advantages of a quartz movement with a solid state micro-controller to achieve a low voltage energy efficient clock having multiple correction schemes available from one clock movement. Multi-mode means accommodation of many correction schemes with only one product in inventory. The A1200 is compatible with master clock systems using a 3-wire synchronous scheme. When connected to a 24 VAC source and to the master clock, the A1200 analog clock will automatically correct each hour for 12 hour correction and twice daily for 12 hour correction and for daylight savings time adjustments. Additional correction schemes are available by changing jumper settings. The low power consumption of the A1200 provides many cost saving advantages resulting in lower acquisition costs. Most systems may be installed using low voltage plenum cable. The A1200 mounts to a standard one-gang electrical box. There is no need for special back boxes or special mounting hardware. Low power requirements allow the A1200 to run off of intercom cabling.