Shell & Tube Condensers
The shell and tube condensers are offered by Batliboi. Special features: optimum utilisation of heat transfer capacity, impingement plate provides even distribution of hot gas over tube bundle and specially enclosed sub-cooler section ensures perfect sub cooling. The condensers have optional water boxes specially designed to enable de-scaling without disconnecting water line resulting in less down time labour and optional dual-circuit condensers are available for duplex mode of compressor operation. The condensers have the following specifications: The shell is made of standard ERW pipes/shells rolled from tested quality steel plates. The tubes are integrally finned, with 10.2 fins per cm and has 19 mm OD copper tubes. The tube sheets are made of carbon and steel that meet IS: 2062 specifications and designed to TEMA class 'C'. The boiler grade steel can be made from steel that meets IS: 2002 specification on request. The water heads are made from cast iron and are designed for easy removal for mechanical tube cleaning and/or tube replacement. They are also designed for proper number of passes to give optimum water velocity through tubes combining efficient heat transfer and allowable pressure drop. The refrigerant is provided with connections for hot gas inlet, liquid outlet and relief and purge connections. The water connections include water inlet, water outlet, water head vent and drain connections. The condenser is designed to measure 21 kg/cm2 (300 psig) on the shell side with pressures measuring 7 kg/cm2 (100 psig) on the tube side. The condensers are designed, constructed and tested in accordance with ASME-section VIII, unfired pressure vessel (UPV) code and finished with the coating of a rust preventive red oxide primer.
Other Catalogs (From Batliboi Limted) :
| • | Ductable Split Air Conditioners |
