Description: Single Pass Honing Machine for higher productivity and accuracy of bore geometry are distributed by Khushbu Engineers. Very close tolerances can be achieved consistently with required surface finish through single pass honing process. In single pass honing, a rotating diamond impregnated tool is passed once through the bore. Either the tool or the job is floating. Material removal is done by diamond cutting points. High wear resistance of diamond impregnated tool ensures the repeatability of the bore size within 0.003 mm. While, bore roundness, straightness and surface finish can be achieved within desired tolerance. Diamond plated tool life is extensively high, resulting in low cost operation. It is applicable for any type of bore like through, stepped or blind and almost all type of material combinations. Single pass honing operation reduces the cycle time resulting in higher productivity. With automation, production rate of 400 nos/ hour can be achieved. It has a very simple operation as compared to conventional honing. Single pass honing machine is manufactured as per the requirement of material removal like single station, four or six stations. Suitable fixture can be developed as per the application.
Other Catalogs (From Khushbu Engineers) :