Profile: UniMeasure, Inc. specializes in providing wire rope actuated linear position and linear velocity transducers. Rotary position transducers provide an analog output signal that is directly proportional to the angle of rotation of the shaft of the device. With a voltage or 4 to 20 mA analog electrical output. These are also known as angle sensors, analog rotary shaft encoders and analog multiturn analog shaft encoders & absolute angle encoders. These devices are commonly used in applications where an absolute output signal is a must. Typical use occurs in closed loop process control and in testing applications where oscillatory rotary motion occurs. RTX series rotary position transducers with analog output are primarily for use in moderate duty applications in wet or dry environments. The chemical resistant thermoplastic case of the transducer provides NEMA 4 (IP-65) ingress protection for applications where exposure to washdown, rain, oil and other liquids may occur. The sealed case is achieved through the use of o-rings and a shaft seal.