Vibration Acceleration Transmitters features DIN rail mount, 100 mV/g accelerometer input, 4-20 mA output, fault detection and buffered transducer output. They are compatible with all voltage output accelerometers and provide a 4-20 mA output proportional to the overall measurement. Each unit provides power for the associated transducer, processes the vibration signal to determine overall amplitude and outputs a 4-20 mA dc current that is proportional to a user specified range such as 0-5 g's in peak or RMS detection. This transmitter has BNC connector, mounted on the front of the unit that provides access to the buffered transducer output signal. The electrical specification include +24 Vdc at 45 mA max., 2 Hz to 20 kHz frequency response and maximum load of 600 ohms resistive.