Wire Cut Edms, High Speed

Company: Essenes

Description: Wire Cut Edms, High Speed - Click To Visit Our Website Wire Cut EDMs, High Speed is used to cut various shapes of metal molds and templates with Ra 1.0, ?m and a precision of 0.012 mm. The machine can cut large parts, such as big taper of 90 degrees to a maximum. It features a height of 1000 mm and length x width of 1200 x 2000 mm. It can basically replace slow speed machines. The price of these kinds of machines is just about 1/4th of slow speed EDMs, and at the same time, reduces the cutting cost greatly. The machines are available in various configurations of table size, starting from 635 x 415 mm up to 2440 x 1330 mm. The machine uses a molybdenum wire with saponification fluid for high speed cutting. The traveling speed of the wire is 5000-8000 mm/min. Taper cutting and processing of different shapes at the top and bottom is possible with the help of the machine.


Other Catalogs (From Essenes) :
• Wire Cut Edm, Slow Speed
Videos   |   Useful Links   |   FREE Magazines
HomeBuyAdd FREE ListingAdvertise Industrial CompanyIndustrial Portal