Description:
Wire Cutting cum Stripping Machine is an accurate and efficient machine to cut PVC coated electric wires and also to remove the insulation from both ends, that is to cut and strip wires from a bundle of wire, so as to make them ready for wiring & harnessing. These machines are user-friendly, tabletop, fully automatic machines. They incorporate the state-of-the art technology and are economic alternative to costly imported machines. These machines can cut and strip single core, multi-strand PVC insulated electric wires. Partial as well as full stripping is possible. A production rate of around 2500 wire pieces per hour can be achieved. Smaller wires can be fed two at a time to get almost double productivity. These machines are manufactured with high quality, robust, imported stepper motors. Machines are supplied with V blades for cutting and stripping a range of wires. These machines come with micro-processor based controls. These controls are housed in a separate control panel, with adequate cooling. This is essential for hot Indian conditions in summer. Apart from standard control configuration, PC-based control system giving a complete database solution with wire planner is also available. Machines require single phase 220V AC stable electric supply and a compressed air supply at 4 bar pressure. Wires from 0.5 sq mm to 6 sq mm can be processed on model CTSS 32. Machine model CTSS 33 is suitable for wires from 0.5 sq mm to 2.5 sq mm. For wires, battery cables from 8 sq mm to 25 sq mm, model CTSS 303 can be used. Machine Makers R.S. has developed and manufactured a range of automatic wire cutting cum insulation stripping machines.
Other Catalogs (From Machine Makers R.S.) :