Ball Valves, Jacketed
Ball Valves, Jacketed has side entry for maintaining the temperature status of fluid from solidifying. The jacket is designed for 10 kg/cm2 steam/hot water pressure. CS jackets for CS valves and SS jackets for SS valves are provided for enhancing the life of jacket against corrosion. Standard supplies include ¼ " NPT jacket connections for inlet, outlet and drainage. Features include: special filled TFE renewable seats, provided to withstand high temperature up to 230°C assuring positive seating, floating ball where sealing takes place by allowing the ball to move under pressure towards the down stream seat to achieve positive tight shut-off and antistatic device - a safety feature, i.e., when static is generated and concentrated on the ball due to solvents and high velocity. The spring-loaded ball is installed on the stem which keeps continuity throughout the valve and discharges the static, pyramidal stem, wherein first stage of defence against leakage, the tapered face of the stem collar gets line contact with body and blocks all leak paths after thrust seal is worn out. The blow out proof stem is internally inserted and functions as the back seat for assured stem sealing at all pressures, live loaded gland packing to avoid frequent & positive gland tightening; long heightened lever-facilitates easy operation and insulation/ puffing on the valve body and pipeline. Mevada Engineering Works offers Saturn brand 1piece split body jacketed ball valves, with side entry for maintaining the temperature status of fluid from solidifying.
Other Catalogs (From Mevada Engineering Works Pvt Ltd) :
| • | Ball Valves, Split Body Design | • | Ball Valves, Wafer Type | • | Ball Valves, 1-piece Split Body |
