Complete Plant To Manufacture Industrial Greases
A wide range of mineral and synthetic oil greases is manufactured by Frigmaires. The company provides complete manufacturing technology and formulations meeting NLGI specifications. Grease is a lubricant of higher initial viscosity than oil, consisting originally of a calcium, sodium or lithium soap jelly emulsified with mineral oil. The grease manufacturing plants are designed in a cost-effective manner to produce low penetration greases with a uniform dispersion utilizing only the required content of soap for per kilogram of grease produced. The first stage of grease manufacture is to prepare the soap by adding the fats and the specified quantity of oil in the saponification vessel until the process is complete. The next step is to transfer the prepared soap to a finishing kettle, where the product is cooled. There are large open blending vessels, provided with a jacket for water-cooling. Here, the balance amount of oil is added and gently blended until the product reaches the desired stability & temperature. Additives are then added into the cooled finished grease and mixed to achieve the required performance characteristics. Some grease requires milling to ensure that it is homogeneous. For this, the grease is passed through a milling machine and a deaerator. Sometimes, the product is re-circulated back into the finishing kettle until it meets the required test results. Finally, the grease is packed. In some cases, it is possible to finish the grease in the saponification kettle itself.
Other Catalogs (From Frigmaires Engineers) :
| • | Basket Mill | • | Dispersers | • | Twin Shaft Mixer-disperser |
