Description: CrazyDrill Small Drill of diameter ranging from 1 to 4 mm can be used to drill from 0.75 mm with interior cooling and all that up to 15 x D. The available lengths of 6 x D, 10 x D, and 15 x D remain the same, and the known incremental diameters are 0.05 mm; cutting edge geometry; and hard metal coating. The drill is capable of advancing 0.07 mm/min with a diameter of 0.8 mm and length of 8 mm in alloy steel (100Cr6) and a cutting at a speed of 50 m/min. The removal of the chips is only necessary at a depth of 7 x D.
Other Catalogs (From Mikron Tool SA Agno) :
