Description:
CrazyDrill, a highly successful small drill for the most demanding requirements is offered by Mikron Tool SA Agno. This is available in four versions, each with a geometry optimally suited to the customers' requirements. Whether pilot to deep hole drills, from steel, aluminium or stainless steel machining, these drills have the capability to tackle difficult materials or extreme cutting parameters. It is used where large series, multiple drillings per work piece and difficult conditions are the norms. Depending on the design, these high-performance drills are available from stock in diameters ranging from 0.4 mm to 6 mm (in 0.5 mm-increments) and lengths of 2 x d to 15 x d. The MiquDrill line is an entirely new range for small and medium batch quantities and minimal holes per workpiece, and the ideal addition to the CrazyDrill high-performance product line. Three types of drills are available: centre drills in various diameters from 0.5 to 6 mm that already centre for the smallest drilling diameters starting at 0.1 mm, while simultaneously performing a 90° or 120° chamfer. The short drill MiquDri11200, drills holes of approximately 2 - 3 x d. As a pilot drill, it guarantees the precise execution with the MiquDri11210, for example, and achieves the precision needed in deeper hole drillings. Both the drills are especially designed for micro machining and are available as uncoated in diameters down to 0.1 mm and as coated from 0.3 mm. The short drill product line is offered in 1.01 mm-increments up to 1.5 mm-diameter, while the universal MiquDrill 210 product line is available in increments from 0.01 mm to 2 mm, and subsequently in every 0.05 mm up to the maximum diameter of 3 mm.
Other Catalogs (From Mikron Tool SA Agno) :