Dry lubricant Moly Bonded Coating Spray, IT 85 A
The dry lubricant moly bonded coating spray, model IT-85 A is a product from Integrated Technology. This is designed for lubricating the sliding surfaces that operate in dirty or dusty atmospheres. They have a wide range of applications including: used successfully for the lubrication of coarse chains and guide ways operating under high loads & exposed to high temperatures, as a lubricant for highly stressed joints with slow sliding speeds and/or oscillating movements. The following usage instructions should be followed carefully: Clean the surface thoroughly, preferably with a solvent. Do not touch the cleaned surface again with bare hands before spraying. If handling is essential, use clean cotton gloves. Shake the can vigorously at-least for a minute (for intermittent use during one operation, shaking for a few seconds is enough). Spray from a distance of 15-20 cm to give a thin, even coating. After use, turn the can upside down and spray till only the propellant gas comes out. This will help clean the dip tube and actuator, thereby preventing choking.
Other Catalogs (From Integrated Technology) :
