Description: An electronic dial calibration tester is offered for periodic calibration of plunger type dial gauge, lever type dial gauges and bore gauges. The tester comes with suitable accessories in mechanical as well as electronic models. The electronic dial gauge calibration tester (L.C.: 0.0001 mm) meets ISO 9000 requirements for periodic calibration of 0.001 mm dial gauges. The equipment offered is similar to Sylvac SA, Switzerland. Sylvac probe is offered as well as digital display unit D-80S, which is brought from Sylvac SA. The tester is compatible to interface with computer through its RS232 port. The foot pedal is also provided to register dial readings to the computer. The suitable software for calibration of dial gauges as per IS 2092 will be supplied with the tester. The equipment consists of rigid stand having dial gauge fitting arrangement on upper holder and micro screw with probe in the holder below the same. The dial gauge holding system has mechanism of fine adjustment, a speciality of the design. The digital unit indicates movement of probe, which is fitted in micro screw. The digital indication unit has required operating switches for setting different modes. The equipment will particularly meet ISO 9000 requirement of periodic calibration. The digital indication unit can also be interfaced with computer and calibration software is offered with the equipment.
Other Catalogs (From Kudale Instruments (P) Ltd) :
