Hydraulic Milling Machine, Model Um-1
Hydraulic Milling Machine, MODEL UM-1 includes table size of 1000 x 230 mm, t-slots-3 x 12, longitudinal traverse of 300 mm, cross traverse of 175 mm (manual), vertical traverse-300 mm (manual) and spindle taper of ISO-40. It also have spindle speeds of 6 (45, 90, 175, 275, 510, 1000), arbor diameter - 1″, hydraulically variable feed range, 000 mm/min, power rate-spindle motor 1 HP, 1400 RPM, hydraulic power-pack motor 2 HP, 1400 RPM and coolant pump 0.1 HP, 2800 RPM and the base of heavy rigid casting serving also as coolant tank. It provides a suitable platform for robust operation and the column is again of rigid built. The heavy knee is made as a box and rests on a vertical column equipped with thrust bearings and protected from dirt & chips by telescopic covers. The moveable parts inside are protected from foreign matter and coolant and the knee being closed at the upper end. The automatic feeds in all three directions are limited by means of adjustable feed trip dogs. The standard equipment includes electric motors, electric coolant pump with fitting, electric panel and one inch dia arbor. The extra equipment includes swivel base, machine vice, rotary table 300 and 400 mm with indexing plate ISO 40 adaptor, collets, jigs and fixtures.
Other Catalogs (From Jasmer Machine Tools) :
| • | Milling Machine, Model UM-1NM-1 | • | All Geared Milling Machine Model UM-2NM-2 |
