Adaptor Chucks are used for holding small drills in larger chucks or flex shaft hand pieces with 3/32″ shanks. It uses the smallest HSS twist drills.

Adjustable Angle Cutters are available in mini or standard cutter. These are 3/4″ shank in diameter. These also include interchangeable insert, 1 key and 1 spare clamp.

Adjustable C-Clamp is cold-drawn steel with special and smoothly rolled threads. Its features are ductile/malleable iron frame, bright plated finish on frames, swivel is securely fastened to screw & revolves freely and machine-ground anvil. The cross pin at the channel entry end engages one of a plurality of grooves in the top of the first member To adjust the extent of the inner member from the outer member, it rotates out of the channel to separate the pin from the selective groove, allowing the inner and out members to adjust their relative position.

Adjustable drill holder is a solid type drill holder, which is used either rotating or stationary. The drilling bushing is 5/8 inch in width & 7/8 inch in length. An adjusting screw is provided in shank to prevent drill from slipping back. The length of body is 11/8 inch diameter.

Adjustable Riser is provided for coupling an irrigation sprinkler to a water supply line. It is adapted for quick and easy longitudinal adjustment to variably select the elevational position of the sprinkler relative to ground level. It comprises a pair of telescopically interfitting inner and outer riser tubes coupled respectively to the sprinkler and to the water supply line. The inner riser tube has a keyway formed on the exterior surface and outer riser tube carries at least one key protruding into and engaged with the keyway.

Adjustable solid drill stop is used to limit the drill travel by locking onto drill shank or into drill flutes with its dual set-screws. It assures uniformity of hole depth from part to part. It is useful with manual or semi-automatic drilling setups. Stop-bits spacers are available.