Mobile Hardness Tester
Mobile Hardness Tester provides precise and reliable hardness testing of all materials that would normally be tested according to traditional hardness testing procedures such as Vickers or Rockwell. The alphaDUR is easy to use by means of the menu driven operation and the large backlit graphic display. The electronic evaluation of the measurement immediately provides the hardness value in HV, 1-113 or HRC. The quality of the testing is guaranteed by 500 measurements per second. Therefore, the alphaDUR is ideal not only for the mobile use but also for the hardness testing in production and vendor inspection. The alphaDUR can be adjusted to a wide range of materials without problems and can store up to 20 calibrations, complete with material identification. Measured data can be permanently stored with date, time, material and evaluation good/bad. For further evaluations, a variety of statistical functions are available. The test load can be adjusted to the range of application. It is not necessary to change the calibration. The small probes allow to test in areas, which are difficult to reach or lay on curved surfaces, in every possible direction without the need of a correction factor. The documentation can be done by means of the ports of the alphaDUR to which a printer or a PC can be directly connected. NDT Solutions introduces the handy mobile hardness tester alphaDUR.
Other Catalogs (From NDT Solutions) :
