Pressurized Systems Integrity Management eliminates lost production and unnecessary shutdown. It maintains a leak-free environment, even on start-up. It reduces equipment and testing costs and the need for re-work. It also removes potential health & safety issues. It protects the environment from emissions.

Protective Fabric is used to minimize wear or abrasion of the media. A protective fabric liner is used to minimize wear or abrasion of the media. The protective fabric is one that has a long breakthrough time, a low permeation rate, slow degradation and little or no penetration.

Pulse Induction Metal Detector are used in the construction industry. Pulse induction metal detectors comprises a detecting circuit for detecting a response to the current pulses and a sampling circuit for sampling the response at predetermined times at least during the time of one of the pulses.

The basic role of radar antenna is to provide a transducer between the free-space propagation and the guided-wave propagation of electromagnetic waves. The specific function of the antenna during transmission is to concentrate the radiated energy into a shaped directive beam, which illuminates the targets in a desired direction. During reception, the antenna collects the energy contained in the reflected target echo signals and delivers it to the receiver. In both of these modes, its primary purpose is to accurately determine the angular direction of the target.

Reduced pressure detector assembly is an outgrowth of the double check detector assembly and is typically used on fire line applications. This assembly is intended to protect the potable water supply from fire sprinkler systems that contain chemical additives or can be connected to an auxiliary non-potable water source. This assembly is comprised of a mainline reduced pressure backflow assembly equipped with OS&Y gate valves, a bypass arrangement containing a smaller reduced pressure backflow assembly and water meter.

Reduced pressure zone assembly consists of two independently operating, spring loaded cam-check valves with a hydraulically operated differential pressure relief valve located between and below the cam-checks, required test cocks and optional inlet and outlet resilient seat shutoff valves. When normal flow exists, both checks, called the zone, is at least 2 PSI lower than the inlet pressure. The differential pressure relief valve is closed during the normal flow. The cam-checks include a stainless steel spring and cam-arm, rubber faced disc and a replaceable seat. It is used to protect against high hazard (toxic) fluids in water services to industrial plants, hospitals, morgues, mortuaries, and chemical plants.

Analyses of pressure relief systems are concerned with transient process disturbances that potentially cause overpressure of piping and mechanical equipment. The transient in pressure may be beyond that allowed by the relevant design code. Process disturbances typically include blockages in piping and vessel outlets, utility failure such as air and power, and uncontrolled process reactions. The aim of transient analyses is to determine the requirements for pressure relief, such that the effect of these disturbances is minimized or controlled. The integrity of equipment is maintained thereby providing a safe operating environment for personnel. An understanding of both the hydraulic and thermodynamic response characteristics of the process involved is fundamental to these analyses.

Remote explosive detonator kit is a lightweight system, which provides the field operator with complete flexibility in the storage and transportation of explosive detonators & batteries and cables. It contains a selection of wired and remotely controlled initiators-detonators complete with all necessary hardware. It is an indispensable EOD/IED tool that can be easily deployed by skilled bomb ordnance technical personnel.

Resilient wedge gate valve is designed for use in drinking water, sewage, and fire protection systems as well as irrigation and backflow control systems. The body of the valve is constructed of ductile iron. The valve is fully epoxy coated on the interior and the exterior. The fusion-bonded coating is applied prior to assembly so that even the bolt holes and body-to-bonnet flange surfaces are fully epoxy coated. This valve features triple O-ring stem seals. Two O-rings are located above, and one O-ring is located below the thrust collar.

Respirator is a device designed to protect the wearer from inhaling harmful dusts, fumes, vapors, and/or gases. Respirators come in a wide range of types and sizes used by the military, private industry, and the public. There are two main categories: the air-purifying respirator, which forces contaminated air through a filtering element, and the air-supplied respirator, in which an alternate supply of fresh air is delivered. Within each category, different techniques are employed to reduce or eliminate noxious airborne contents.