Fire protection cover consists of firm frame for installation into construction structure and hinged cover. The cover frame is welded from thin-wall profiles. Its upper board is made from steel sheet with anti-slip patterns. The lower board is made from smooth steel sheet. The space between the upper and bottom boards is filled with insulating material. The easy opening of the cover is possible by means of gas strut. The gas strut is installed between the frame and the hinged cover. Its stroke length is adjusted with distance chain. The fire-protection tape is stuck on the cover's peripheral edges.

Fire protection valves are designed for use in air conditioning systems and in addition to fire protection. These valves also have a ventilation function. It can be used for both air supply and extract applications. The volume flow rate can be adjusted via the two-position control unit. The valves are fixed into the wall with bayonet fixing and catch device to prevent accidental release.

Fire retardant paints can be used on plywood for nonstructural interior finish applications such as wall and ceiling paneling to reduce flame spread ratings to 25 or less, depending on the paint selected. These can also be used on other engineered wood products, such as glulam and I-joints for flame spread reduction. There are two broad types of fire-retardant paints. One is a pigmented type designed as a masking finish similar to ordinary paint systems. Most of theses paints typically intumesce or swell to a thick insulating layer when exposed to rapidly rising temperatures. These types of paints are designed for their fire retardant properties and may not provide the full range of colors and decorative effects of conventional finishing systems. The second type of fire retardant paint is a clear finish, similar in appearance to a lacquer or clear varnish, which is used for high appearance paneling such as fine hardwoods.

A fire valve is an essential part of the oil supply system. Its purpose is to cut off the flow of oil outside the building in the event of fire within the boiler area. The valve should be located at the point of entry into the building of the fuel line. It must be activated by a remote sensor located over the burner, a clip is provided within the appliance for the sensor.

Firefighting Reels are available in aluminum or stainless steel construction. These reels feature crank rewind cable or sprocket drive powered by an electric or compressed air motor. They offer live connection of power cable to provide easy hose dispersal and quick pick-up to save time in payout & clean- up.

Flame detectors are used in optical sensors working at specific spectral ranges to record the incoming radiation at the selected wavelengths. The energy radiated from a fire is electromagnetic radiation that can be read at various spectral ranges. The signals are then analyzed using a predetermined technique. Flame detectors are available in a number of sensor types such as UV detectors, IR detectors, UV/IR detectors, IR/IR detectors, and IR^3 detectors, and triple IR spectral band detectors.