Fluorescent Leak Detector Dyes glow under UV light to reveal the smallest of leaks in your vehicle's oil and fuel systems. This product can be used for all oil and fuel systems such as engine oil, transmissions, power steering and gasoline. These are used for all automotive coolant systems.

Foam monitors are designed to control the horizontal and vertical directions of large capacity discharge streams. Water-oscillating monitors will automatically move side-to-side using water pressure as the energy source. Remote controlled monitors use an electric joystick tied into a hydraulic system. Other monitors are operated manually using a tiller bar to control direction and elevation. Various aspirating and non-aspirating nozzles are also available for use with monitors and/or handlines. All foam monitors are self-inducing and all that is required to operate is a high-pressure water supply.

Gas detectors are used where gas concentration levels are a concern. Typical users include chemical industry, textiles, power plants, steel mills, and pharmaceutical industry. These are capable of detecting gases at inert or low oxygen backgrounds. It basically functions as a monitor to test the surrounding air for ethylene oxide levels. It can be either portable, or wall mounted, depending on the user's need. The alarm monitors the ethylene oxide levels down to the specific ppm, and employ both visual and audio alarms when the level is exceeded.

Gravity Feed Metal Detector consists of the metal detector electronics, test coil and a high-speed rejection system. The entire assembly is mounted on a rigid platform. The metal detector works on the principle of eddy currents with focused electromagnetic field. The system has an automatic balance, which maintains the performance of the system without the need of periodic adjustment.