Sleeves
Sleeves are suitable for metric shaft sizes in multiples of 5 mm (prefix H) as well as inch sizes in multiples of ¼ inches. These are ground for the taper in order to have correct seat and are checked for the consistent accuracies to ensure trouble free service. It is made out of C20/ C30 steel material, H-adapter sleeve for metric size, HE-adapter sleeve for inch size, OH-adapter sleeve with oil injection groove, AH-withdrawal sleeve for metric size, AOH-withdrawal sleeve with oil injection groove and A - thread standard for whitworth to metric. It is used to locate rolling bearings with tapered bore. ZKL Bearings (India) Pvt Ltd is engaged in the production of sleeves. They offer ZKL lock nuts provide a simple means of axially locating bearings & other machine components on the shafts and also facilitate mounting & dismounting of small bearing on withdrawal sleeves. The lock nuts are designated as KM XX' and for withdrawal nut it is 'HM XX'. ZKL lock washer. The lock washers are used to lock the nuts on the shaft, while inner tab is used for locking for the larger size of nuts. Lock-washers are designated as 'MB XX'. Locking washers are made out of deep drawing, cold rolled annealed steel.
Other Catalogs (From ZKL Bearings (India) Pvt Ltd) :
| • | Sound Level Meter, Zslm-130 | • | Spherical Roller Bearing New Generation 'e' Design |
