Description: FOR FEEDING ENGINE VALVES A vibratory feeding system has been introduced for feeding of engine valves having dia from 20 to 50 mm and length between 30 and 200 mm with two outlets. The equipment has been designed in such a manner that all sizes between these dimensions can be fed without any changeover. This is available in two models, viz., Model 400 HD and Model 630. The vibratory bowl feeder is used for feeding and orienting the engine valves. Thereafter, through a pneumatic take-up system, the engine valves are transported up to a height of 2 metres from the ground level for further feeding. Speed of 40 to 100 pieces per minute per outlet can be achieved depending upon the sizes of the engine valves. The system results in a smooth flow of components without any starvation to the next machines. The biggest advantage of this system is loading of the heavy engine valves at a height of just 500 mm, usage of the bare minimum space and flexibility of feeding various sizes of engine valves through the same feeding system. The advantage of having two outlets is that two machines can be fed through a single vibratory feeding and pneumatic take up unit thus saving not only on space but also on the price. System is available in PLC and non-PLC (electrical control) versions. Vibratory bowl feeders for feeding engine valves have been introduced by Elscint Automation, an ISO 9001:2000 certified vibratory parts feeder manufacturer (having CE marking).
Other Catalogs (From Elscint Automation) :
