(1 supplier)
(9 suppliers)
(1 supplier)
(1 supplier)
(10 suppliers)
Ultrasonic hardness tester works on a principle of vibration to measure hardness electrically and through a sophisticated algorithm. It converts the measured signal into an accurate, repetitive measurement. It features direct reading of hardness by digital display, conversion between HV and HRC and multi direction applicability, and works in any direction.
(8 suppliers)
(2 suppliers)
(31 suppliers)
(1 supplier)
(1 supplier)
(2 suppliers)
(1 supplier)
(1 supplier)
(1 supplier)
(1 supplier)
(5 suppliers)
(1 supplier)
(1 supplier)
(1 supplier)
(12 suppliers)
(28 suppliers)
(2 suppliers)
(38 suppliers)
(2 suppliers)
(1 supplier)
(2 suppliers)
(1 supplier)
(1 supplier)
(12 suppliers)
The ultra probe can be used to locate leaks in pressurized systems regardless of the type of gas used. This is especially beneficial in areas where there is a saturation of gases or where a wide variety of gases, pressurized vessels and vacuum processes exist. During a leak, a fluid moves from a high pressure to a low pressure. As it passes through the leak site, a turbulent flow is generated. This turbulence has strong ultrasonic components, which are heard through headphones and seen as intensity increments on the meter. It can be generally noted that the larger the leak, the greater the ultrasound level.
(27 suppliers)
(1 supplier)
(1 supplier)
(3 suppliers)
(2 suppliers)
(1 supplier)
(6 suppliers)
(1 supplier)
(6 suppliers)
(1 supplier)
(33 suppliers)
An ultrasonic level sensor provides accurate single-point or continuous level ultrasonic measurement for a full range of liquids and solids. It is a non-contact sensor that is a direct replacement for level senders on tanks with depths of ? 3.0 meters. It is ideal for tanks or storage containers that have a depth/height up to 118 inches (3.0 meters) and also has real time processing of level data and messaging over a RS-485 bus. These ultrasonic level sensors are chemically compatible with diesel fuels, ethanol, oils, fresh water, sewage water, urea (Ad Blue), and engine coolants.
(3 suppliers)
Ultrasonic level switch with sanitary transducer uses pulsed signal technology for superior performance in difficult process conditions, and to provide excellent immunity from sources of electrical noise interference. It is suitable for a wide variety of critical level applications. The high frequency ultrasonic pulses are transmitted across a transducer gap in the presence of a liquid medium, but are attenuated when the gap is dry. It is ideal for low level alarm, seal pot level and leak detection applications.
(3 suppliers)
(1 supplier)
(5 suppliers)
(7 suppliers)
(3 suppliers)
(5 suppliers)
(2 suppliers)
(1 supplier)
(1 supplier)