Foam depressants control the tendency for foaming. Detergent and dispersant additives can facilitate aeration of oil, which results in foaming. This can reduce the lubricating ability of the oil, and interfere with the pumping of the oil. It is commonly added to hydraulic fluid to expedite foam breakup and releases dissolved air. It often does a good job in increasing the capacity of a given separator. However in sizing a separator to handle particular crude, the use of an effective depressant should not be assumed because characteristics of the crude and of the foam may change during the life of the field. Foam depressant allows more throughput than the design capacity.

Foam fabrication services are performed to produce foam cores, foam plastic, cushioning foam, closed cell foam, acoustic foam, and polyurethane foam. It includes water jet cutting, CNC routing, hot wire cutting, die cutting, thermoforming, profiling and slitting. This technique combines sculpture with geometry and pattern making. It is used for carpenter works. In foam fabrication process, foam pieces are glued to backing materials and glued to make intricate shapes. It involves cutting shapes out of sheets of flexible foam and gluing them into 3-dimensional forms. It is used in houses that includes die-cutting, contour cutting, convoluting, cubing and laminating.

Foam Filter Cleaners are designed to dissipate filter oils without harming filter glues. It quickly dissolves caked-on dirt, grease and grime with a simple spray-on and hose-off application. It will clean the sinks, buckets and it will not harm the environment.

Foam Filter Oils consists of high level of air flow and it is a special blend of synthetic polymers that allows increased particle removing efficiency and capacity. It is made through new and improved oil formulation. It retains up to 8 percentages more airborne contaminants when compared to other foam filter oils.