Tank Level Indicator provides quick assessment of liquid levels in tanks. It features double-wall construction and is easily mounted vertically in a piping system. It is available with either 1/2-in. or 3/4-in. NPT fittings. The operating pressure is 100 psi.

Tank Mounted Mixers is used in cylindrical baffled vessels or square unbaffled mixing tanks. It is used in paint, ink, and coating industries. It may be supplied with variable speed using electronic drives, various lip and vacuum seals and various turbine designs. It is supplied with standard or explosion proof AC motors.

Tank mounted strainer is used for low flow that has replaceable or cleanable filter element.  It is mounted through the sidewall of the tank and is used only in a suction application.  Two sizes are available from 6 to 15 gpm. The connector end is available in anodize aluminum and steel, or stainless steel. The cellulose and micro glass elements are replaceable.  The stainless steel wire cloth elements are cleanable and /or replaceable. The element has an o-ring fit into the reducer bushing and snaps into place. 

Tank Press/Extruders is designed to deliver, discharge, empty or extrude high viscosity or paste products directly from the mixing tank into containers, cartridges, tubes or filling machines. It has evacuation pressure up to 80 Psig. It may be designed to discharge from bottom of mixing tank or from top of ram plate when a discharge port is so provided. The product is then piped from top of ram plate to another container or passed through a manifold to overhead filling stations. It has heating system, the heating foil is in contact with the nozzle outside steel surface. The heating system is designed to keep the paste temperature in the 80 degrees F range to stimulate smooth flow of the extruding paste.

Tank profiler is a sensor with an antenna on the end of a measurement tape and the electronics (transmitter) encased in the sensor. The sensor can be lowered and raised in a tank to make measurements of the process at various elevations. The sensor sends a signal back to the reel assembly, which has an electronic module that converts the signal to a percent water reading. It is also capable of making process temperature measurements from 0º to 80º C. The electronics have the capability of storing information from several tanks. It is an industrial instrument for measuring emulsion and temperature profiles. This unit measures not only level/ullage and organics/water interface levels, but also the percent water concentration in the hydrocarbon or organic layer/emulsion.