Real-time instrument testing is conducted using mobile laboratories that can be brought onto site to perform stack emission testing. These labs are equipped with state-of-the-art equipment to perform real-time pollutant monitoring to generate accurate test results. This instrument testing typically generates reports on-site, so the persons can know that their site is in regulatory compliance before mobile testing lab leaves the site.

Real time monitor (HMI) software is a powerful, flexible data acquisition and control software package designed to run in the Microsoft Windows® environment. This HMI software is ideal for telemetry and SCADA system. It comes with the DDE I/O server, automatic configuration reading data from the RTU, runtime security with password protection, and point capabilities. The object oriented design of graphical displays and user-programmable logic/functions can be customized for each user's workstation and its open connectivity provides gateway to third party systems.

Reamer burr-bit is used to eliminate additional operations involved with chamfering or deburring reamed hole. It does not leave burr pushed into hole in which the reamer is used as pilot. Its sizes range from 0.116-0.500 in. and 3.0-12.5 mm.

Reamers are rotary tools used for light material removal. Reamers are suitable for deburring and sizing the inside diameter (ID) of holes. Reamers are used for enlarging or finishing a hole previously drilled, bored, or cored to give a good finish and an accurate dimension. A typical reamer consists of a set of parallel straight or helical cutting edges along the length of a cylindrical body. Each cutting edge is ground at a slight angle and with a slight undercut below the cutting edge. Reamers must combine both hardness in the cutting edges, for long life, and toughness, so that tool does not fail under the normal forces of use. They should only be used to remove small amounts of material. This ensures a long life for the reamer and a superior finish to the hole.