(6 suppliers)
(33 suppliers)
(1 supplier)
(2 suppliers)
(1 supplier)
(2 suppliers)
(16 suppliers)
(1 supplier)
(1 supplier)
(1 supplier)
(2 suppliers)
Temperature Controlled Water Valves is a retrofit automatic apparatus. It has twin sensor adaptor, manual actuator and spacer. The adaptor can be used with both 2-port and 3-port control valves. It is used in conjunction with a twin sensor adaptor and a self-acting temperature control system, allowing manual shutdown without interfering with the control setting. It has own limiting conditions. A spacer, when fitted between the control system and any 2-port or 3-port control valve (except DN80 and DN100 3-port valves), enables the system to operate at a maximum of 350°C, providing that the control valve itself is able to tolerate such high temperatures.
(1 supplier)
(8 suppliers)
(1 supplier)
(270 suppliers)
Temperature Controller is an instrument used to control temperature. The temperature controller takes an input from a temperature sensor and an output is connected to a control element such as a heater or fan. A temperature control system relies upon a controller, which accepts a temperature sensor such as a thermocouple or RTD as input.
(149 suppliers)
(130 suppliers)
Temperature Controllers basically consist of two parts, which includes sensing element that responds to temperature and a switch consisting of normally open, and/or normally closed contacts. To accurately control process temperature without extensive operator involvement, a temperature control system relies upon a controller, which accepts a temperature sensor such as a thermocouple or RTD as input. The contacts operate from the temperature-sensing element. That factor to be considered when selecting a temperature controller is temperature range, type of sensing element and response time.
(2 suppliers)
(45 suppliers)
(4 suppliers)
(1 supplier)
(1 supplier)
(2 suppliers)
(4 suppliers)
Temperature Crayons are used to touch the surface and verify that test temperatures are achieved and maintained. Temperature crayons are used to control and monitor steel temperature. Temperature crayons are also used to monitor the heat limit. These crayons are required to avoid overheating.
(2 suppliers)
(2 suppliers)
(25 suppliers)
Temperature Data Logger is used for transportation monitoring and logging. Its extreme temperature ranges from 300°f to 2000°f with external probes. It has removable flash memory card and audio & visual alarm for low and high values. It uses user replaceable battery. It has 1 minute to 120 minutes of sampling frequency. The data can then be easily uploaded and analyzed to detect possible thermal damage. It has completely self-contained temperature data loggers with internal sensor and memory. It has traceable instrument-grade temperature measurement accuracy. It also connects to computer serial port.
(2 suppliers)
(9 suppliers)
(2 suppliers)
(2 suppliers)
(0 suppliers)
(1 supplier)
(1 supplier)
(1 supplier)
(1 supplier)
(9 suppliers)
(1 supplier)
(1 supplier)
(3 suppliers)
(1 supplier)
(52 suppliers)
(9 suppliers)
(60 suppliers)
(1 supplier)
(67 suppliers)
Temperature gauge is a device used to indicate the temperature of an item being monitored. The display can be an analogue dial. The word gauge would seem to exclude a thermometer, which uses the thermal expansion of a liquid, but in the sense that it meas
(39 suppliers)
(6 suppliers)
(23 suppliers)
(2 suppliers)