Steam cleaners are efficient in removing packed dirt or contamination in recesses that are impossible to reach. It sanitizes and disinfects but without using chemicals, instead uses simply dry steam of levels of 240°F and above. These cleaners are the household-cleaning tools for allergy sufferers and all those wanting a clean and healthy home environment. The application of detergent and alkaline cleaners using steam cleaners is an effective degreasing method. Steam cleaning work is better for small, specific applications such as the sterilization of surgical tools or for a specific stainless steel cage.

Steam cleaning is a method used to instantly convert distilled water to high pressure, super-heated steam. It is effective for removing grease, oil, flux, adhesive, fingerprints and many other contaminants. It makes use of its main elements that allow steam to be rapidly generated while never coming into contact with any components other than stainless steel and Teflon. There is no copper, aluminum, or steel to corrode and contaminate the substrate being cleaned.

Steam Coils are used as preheat or heating coils in HVAC applications. Steam coils are made with single tubes. Steam coils are typically constructed with orificed inner steam distributing tubes, centered and supported to provide uniform steam distribution through the coil and to provide maximum protection against freeze ups.

Steam condenser is a device, which is used to maintain vacuum conditions on the exhaust of a steam prime mover by transfer of heat to circulating water or air at the lowest ambient temperature. It is a major component of the steam cycle in power generation facilities. It is a closed space into which the steam exists and is forced to give up its latent heat of vaporization.

Steam Conditioning Valves operate by mixing superheated steam under high pressure with desuperheated steam or atomized water. Steam conditioning valves include desuperheaters, turbine bypass valves and steam converting valves for power & industrial plant applications. It features high quality forged steel body for total integrity of pressure containing parts, valve inlet & outlet connections and split pressure class inlet/outlet to minimize thermal stress levels.

Steam Drum is used to permit the separation of saturated steam from the steam-water flow and send it to the super heater or directly to an end use. It serves to mix the feed water with the water discharged from the steam-water separators, water treatment chemicals, and purify the steam prior to discharge, remove part of the water to control boiler water chemistry and provide limited water storage to accommodate rapid boiler load changes. The continuous blow down piping is placed in the drum at a point below the water level where the concentration of solids tends to be highest. The steam outlet is normally a series of tubes at the top of the drum that carry steam to the super heater. In low-steam-flow situations, natural steam separation by gravity at the steam water surface in the drum can be sufficient depending upon the drum size, steam flow rate and operating pressure.