Green sand Foundry Equipments includes intensive mixer, sand cooler, moulding machines, knockout machine, dust collector and sand mix muller.

Heat Resistant Castings are classified as chromium and chromium-nickel. These are used to produce finished or semi finished products. They are suitable for services above 1200 degree F (650 degree Celsius). These are used in metal treatment furnaces, gas, turbines, aircraft engines, military equipments and oil refinery furnaces.

Heat Treatment Furnace includes the steps of pre-heating the furnace, prompting the user to load the material, reheating the furnace to heat treatment parameters, controlling the exposure time & temperature and prompting the removal of the material. These furnaces perform various heat treatments on metals including hardening and tempering in a vacuum. These are designed for the pre and post weld heat treatment of gas & turbine nozzle segments.

High pressure die casting is a manufacturing process in which molten metal (aluminum) is injected with a die casting machine under force using considerable pressure into a steel mold or die to form products.

Induction casting machine provides precision control of the investment casting process along with high production of perfect casting. It improve quality and eliminate rejects through precision control of temperature and many process variables.

An impeller is a rotating device that force liquids, gases and vapors in a desired direction. It is a rotor inside a tube or conduit to increase the pressure and flow of a fluid. It is also a rotating component of a pump, usually made of iron, steel, aluminum or plastic, which transfers energy from the motor that drives the pump to the fluid being pumped by forcing the fluid outwards from the centre of rotation. Impellers are usually short cylinders with protrusions forming paddles to push the fluid and a splined center to accept a driveshaft.

Industrial Magnets are manufactured for industrial use. They include individual magnets, bulk magnet materials, magnetic assemblies, magnetic sweepers, magnetic lifts, magnetic sheet handlers, magnetic retrievers and permanent/electromagnet combinations.

Investment casting is a type of metal forming techniques. It is suitable for repeatable production of net shape components, from a variety of different metals and high performance alloys. Although generally used for small castings, this process has been used to produce complete aircraft door frames, with steel castings of up to 300 kg and aluminium castings of up to 30 kg. Compared to other casting processes such as die casting or sand casting it can be an expensive process, however the components that can be produced using investment casting can incorporate intricate contours, and in most cases the components are cast near net shape, so requiring little or no rework once cast.

Knockout Machine are of sturdy construction and easy to maintain. They include springs, which are designed in such a way that it will transit very less vibratory effect to the base frame. The base frames are specially designed to withstand heavy shocks and overloads provided with proper spring rest. The entire system is driven by eccentric shaft supported by heavy-duty anti-friction bearings. Knockout machine is specifically designed to quietly, safely & efficiently remove the shell from an investment casting.