Electronic timed drain is ideal for protecting surge or compressor tanks. They also include 6' power cord.

Electronic Vacuum Sensor is capable of detecting a relatively low vacuum pressure of about 0.04 to 0.05 inches of water. The power source is coupled to the contact blade. The LED is activated by a high-sensitivity vacuum switch. A thin flexible diaphragm extending longitudinally through the channel between the second contact blade and the lower surface of the channel. The pressure travels along the diaphragm and raises the diaphragm.

The objective of the electrostatic precipitator control system is to create and maintain an electrical field so that the desired collection of fly ash occurs. An additional control objective is to minimize power consumption consistent with performance. This system maximizes the effective voltage and current. The electrical sparks or arcs cause draining of the input.

Empty Capsule Eliminator is an economical method for the removal of empty, broken or separated capsules. The construction consists of 3 main parts: collection chamber, vacuum head, and exit chute. It can be mounted on the discharge point of filling machines, capsule polishers, or any inline production equipment, prior to packaging. It can run in conjunction with either transport systems and metal detectors. They have filter, regulator and pressure gages and the production rate is 120,000 capsules per hour. It requires 80 PSI line pressure of which it only uses a 22 PSI regulator setting for a ″0″ size capsule.

An encoder is a device used to change a signal or data into a code. The code may serve any of a number of purposes such as compressing information for transmission or storage, encrypting or adding redundancies to the input code, or translating from one code to another. This is usually done by means of a programmed algorithm, especially if any part is digital, while most analog encoding is done with analog circuitry.

Energy Control System emulates normal EMS functions and is the only part of the OTS with which the trainee interacts. It consists of supervisory control and data acquistion system, generation control system, and all other EMS functions.

The main purpose of engine control system is to allow the engine to perform at maximum efficiency for a given condition. It controls various aspects of an internal combustion engine's operation. It also determines the quantity of fuel, ignition timing and other parameters by monitoring the engine through sensors. These sensors can include, MAP sensor, throttle position sensor, air temperature sensor, oxygen sensor and many others.

The environmental noise analyzer is designed to make long-term outdoor noise monitoring simple and effective. It consists of three different sound level meters to go into the kit, a printer and optional DAT recorder. It is used for boundary noise measurements, statutory noise nuisance monitoring, nighttime noise levels and general consultancy work. It has two weatherproof connectors in the outside of the case that allow access to all the instrument connections, e.g. microphone, power in, signal out and DAT switching. A weatherproof microphone enclosure is also available along with a weatherproof cable to complete the kit. A security kit and movement alarm is also available so that the kit can be left with confidence.

Environmental quality meter measures humidity, temperature, airflow, and light level. It is ideal for environmental testing anywhere. It combines a light meter, humidity meter, thermometer and anemometer into a single compact unit. This meter features dual display with low battery and over range indications, tough-tone button, max-min, auto power off and hold functions.

Ethylarmor inLlne pH probe is designed to meet critical pH measurement requirements. It accepts virtually any pH sensor and 2-wire transmitter; as determined by process parameters and pH sensor and transmitter. Sensors are easily removed and re-inserted within minutes.

Ethylene oxide gas monitors are designed for measuring exposure to ethylene oxide in the pharmaceutical, health care, and chemical industries. The ethylene oxide vapors are adsorbed on chemically treated activated charcoal where they are converted to 2-bromoethanol, desorbed with 10% methylene chloride in methanol and quantified using a gas chromatograph equipped with an electron capture detector and capillary column.

Evaporator Pressure Regulators are used in refrigerator system. It controls a plurality of circuits, each circuit having at least one refrigeration case and an electronic evaporator pressure regulator in communication with each circuit. Each electronic evaporator pressure regulator controls a temperature of one of the circuits. A sensor in communication with each circuit measures a parameter from the circuit. A controller associated with each electronic evaporator pressure regulator controls the respective electronic evaporator pressure regulator based upon measured parameters from each of the circuits.