Electrical output registers compatible with turbine meters to provide single or double contact closure corresponding to defined volume increments. It is commonly used in utility, industrial and agricultural installations where totalization is required at a site remote from the meter, and where precise volume input to batching equipment is required, for injection of chemicals, dyes or other additives. It is available as single or dual switch output.

Electrical Transducers with analog output are designed for power monitoring and for interfacing with an analog PLC in process control systems. Electrical transducers with analog output are precision instruments with 0.5% accuracy designed for continuous monitoring of power used in single-phase or three-phase electric circuits.

Electro-mechanical Switches are available as terminated or non-terminated. These are maintaining all the electrical characteristics. The device operates in the frequency range of 1MHz to 2GHz to filter, modulate, mix and rectify microwave signals. It serves as a building block to produce either band pass or band-reject filters, which attenuate certain frequencies.

Electrokinetic Charge Analyzer gives quantitative information about the compatibility of furnish with chemical additives, quantity of anionic trash and the dosage of wet end chemicals. They measure colloidal and ionic charge of the wet end using the streaming current principle.

Electrokinetic Charge Titrator is an online charge analyzer and automatic titrator. This instrument is used to determine wet-end charge trends as well as the effects of various additives on system charge. Electrokinetic charge titrator measures charge and charge demand of thick stock or headbox samples.

Electrolytic Moisture Sensor consists of a pair of spirally wound, parallel, electrode wires, partially embedded within the length of a glass tube. Its feature includes small size, simplicity of design and low power consumption. It is ideal for use in portable analyzers, which is used primarily for troubleshooting and spot monitoring.

Electromagnetic Flow Converters are converter that is exchangeable without need for reprogramming, available for AC & DC voltage operating, digital signal processing and high-speed signal conversion system. These converters are used in industries such as chemical, paper, pulp, food & beverages, pharmaceuticals and metals & mining.

Electrometer Flowmeter is an instrument used to quantitatively measure blood flow velocity through a blood vessel. The flowmeter consists of a magnetic core or ring clamped around a vessel segment, which produces a magnetic field. The flowmeter is based on the principle that an electromotive force is induced in a conductor moving so as to cut the lines of force in a magnetic field. These flowmeter reveal accurate measurements of blood flow and require direct expose of a vessel, limiting clinical applications to measurements during surgery.

Electronic balances come in capacities from a few milligrams to kilograms. A single control bar turns the balance on to provide a digital readout of the mass. Electronic balances can be coupled directly to computers or recording devices. The precision is greatly increased with a digital display, replacing visual interpretation of a scale. Electronic balances are generally more precise and gives digital reading. Due to their sensitivity and cost, extreme care is needed to maintain the instrument.