Chain oils are needed to protect the metal elements of the chain in very hot temperatures and very high load situations. The main purpose of the chain oil is to prevent breakdowns. It is an economical uninhibited mineral oil for the lubrication of chain saw bars, chains, and other applications with non-critical requirements or where oxidizing influences are not severe. Chain oils should always have certain properties such as good creeping ability so that the oil can penetrate deep into the chain links and protect the contact surfaces.

Chassis grease is a calcium-based grease. It resists water washout. These are suitable for certain open and semi enclosed gears as well as chain drives of farm equipments and for general chassis lubrication including suspension and steering system. It is also used dramatically reduce friction and wear in all chassis lubrication applications including drag links, ball joints, king pins, universal joints, idler arm bearings, and fifth wheel faceplates and pivots.

Chuck Lubricants are high performance oil formulated lubricants to provide a high level of protection from wear, with proprietary additives for superior protection against rust and resistance to oxidation.

Compressor Fluids are recommended for cooling and lubricating continuously operating rotary screw & vane compressors, which operate at high discharge temperatures. Compressor fluids are not used to compress wet or sour hydrocarbon gases. These compressor fluids are compatible with all compressor oils except polyclycols and all standard seal & hose materials.

Compressor oils are used to lubricate both the working parts and the pressurized spaces in a compressor. The purpose of the lubricant in the pressurized section is not only to reduce friction and wear but also to improve sealing of the pressurized spaces and to provide cooling. The compression process generates a lot of heat and in general, the higher the final compression temperature of the air at the outlet from the compression space, the higher are the requirements placed on the oil with respect to its oxidation stability and resistance to deposit formation.

Concrete Form Oil is formulated to impart a separation film to both wood and metal casting concrete forms. This non-staining material consists of light mineral oil combined with a chemical agent to allow better than average cling tendencies to forms. The combination of ingredients physically repels both water and concrete. The product is designed to be non-toxic and does not require a red label.

Cordless Grease Gun Accessories are used to relieve pressure from cordless grease gun. It converts battery-powered gun to oil gun. It has lightweight, in-line grease meter with LCD display. It includes 120V input charger and two 14.4 batteries. One fully charged battery delivers up to 10 cartridges of grease and it develops 10,000 psi. Its motor is equipped with a thermal protector and optimized airflow to maximize motor life.

Cordless Grease Gun has 120V input charger and two 14.4 batteries. It is equipped with a thermal protector and optimized airflow to maximize motor life. It is worked as a battery-operated grease gun with outstanding performance and a longer battery life. It also delivers high volume or high pressure. This is portable automatic high-powered greasing by simply pressing the trigger.

Cryogenic processing is a fascinating and truly spectacular means to increase wear resistance & life on all metal and some plastics. Deep cryogenics is the ultra low temperature processing of materials to enhance their desired metallurgical and structural properties. The cryogenic process is not a surface treatment. It affects the entire mass of the part, making it stronger throughout and dramatically reducing wear. The process keeps working for the life of the tool rather than ceasing to be effective after the surface is worn. Grain structures are closed by the process resulting in a larger contact surface area that reduces friction, heat and wear.

Cutting oils are mineral, animal, vegetable, or synthetic oils used without dilution with water. These are more effective as lubricants than coolants. They are used extensively in grinding and honing operations, where they permit higher metal removal rates with better finish and less surface damage than water-based fluids. They are also used in relatively low speed operations such as broaching, tapping, gear hobbing, and gun drilling, since in these operations cooling capability is less critical. These are stable and provide excellent rust protection.

Dielectric Grease is used to switch contacts and potentiometer tracks that improve performance and operating life. It is also used in coating electrical connections that come into contact with moisture.

Dispersants are a group of chemicals designed to be sprayed onto oil slicks that accelerate the process of natural dispersion. Spraying dispersants may be the only means of removing oil from the sea surface, particularly when mechanical recovery is not possible. Their use is intended to minimize the damage caused by floating oil. Dispersants are divided into two main components, a surfactant and a solvent. Surfactants are molecules, which have an affinity for two distinct liquids that do not mix, acting as an interface between them. A part of the surfactant molecule used in dispersants has an attraction to oil while another part has an attraction for water.

Dry film lubricants are solid materials, which provides low frictional resistance between surfaces when applied directly to interacting surfaces. It is suitable for bearings, combustion engines, compressors, pistons, machines, and gears.

Dry Graphite Lube is a high lubricity graphite. It dries rapidly at room temperature to provide clean, longwearing lubrication. This lube is also conductive and used in lubrication and electrical properties. It has adheres with minimum pre-treatment.

Dry lubricants are divided into two main classes: laminar soft materials whose low shear allows surfaces to slip over each other and hard materials which run with minimal wear. Ball bearings with dry lubricants are employed for space applications where bearings must run in vacuum and temperature extremes. It provides lubrication for most surfaces, including metal, plastic, wood, leather, fiber, elastomers, and glass.

Electrical Contact Grease is used for the purpose of preventing deterioration of contact performance caused by component wear. Electrical contact grease is typically used in joints and terminations.